OPC Sport C Tohatsu Outboard Racing

     This is another one of my favorite OPC classes. We know were those specs need to be to make the strongest engines. Just check our record.

    

APBA National Champion 2004………….. Carl Barrett
APBA National Champion 2005……………Michael Hodges
APBA National Points Champion 2006…….Carl Barrett
APBA National Champion 2006………….. Carl Barrett
APBA National Champion 2010……………Tom Kratochwill
APBA National Champion 2010………Denise Telcott, Sport C Marathon

Dynamometer Break-in Service
Highly recommended. Our test facility can do the break-in of your engine better and in more controlled conditions than can be done on a boat. This saves you time as your engine is delivered to you with knowledge that it runs correctly and is race ready.

Dynamometer Service (per day charge)…………………$400  
Racers may come to our facility or ship engines to WPT for Dyno tuning and evaluation of many engines in a days time. See which of your engines is better and tune the best performance out of each one. Fuels, Jetting, Timing and even Spark Plugs, are things you can now verify with solid data, no longer just opinion.

     Bench Evaluation: Disassemble, evaluate all measurements and document only. No charge with Race Prep. Reassemble after cleaning parts if further work is not done by WPT. If/When we prepare your race engine, the above is not charged. It is part of doing it right. We need to know what you need first.

     Dynamometer Break-In Service: Highly recommended. Our test facility can do the break-in of your engine better and in more controlled conditions than can be done on a boat. This saves you time as your engine is delivered to you with knowledge that it runs correctly and is race ready.

     Dynamometer Service: Racers may come to our facility or ship engines to WPT for Dyno tuning and evaluation of many engines in a days time. See which of your engines is better and tune the best performance out of each one. Fuels, Jetting, Timing and even Spark Plugs, are things you can now verify with solid data, no longer just opinion.

     Providing Us With Equipment: You need to provide good parts to work from and WPT can prepare Quality, Legal Race Engine using techniques acquired from 25 years of preparing race engines. Each engine is prepared to the best of the ability of the parts provided. New parts will be recommended when required. It is our goal to make every engine, a winning engine.

  • Full Race Preparation Service SPORT C – $650.00
  • Block Race Preparation – $250.00
  • Deck Block – $40.00
  • Layout & Document – $150.00
  • Machine Head Face – $45.00
  • Hone Cylinder (each cylinder) – $15.00
  • Bore & Hone Cylinder (each cylinder) – $55.00
  • Re-Sleeve, Finish Bore, & Hone Cylinder (each cylinder) – $210.00
  • Hone Cylinder (each cylinder) – $15.00
  • Gear Case Shaping (per hour) – $75.00
  • Bench Evaluation – $250.00
  • TLC Charge – $75.00
  • Dynamometer Service (per day charge) – $400.00